Property flood resilience code of practice
11 February 2020
03 March 2020
Policy and Public Affairs
Launch of new industry-led standards on flood resistance.
Industry figures got together to mark the launch of the property flood resilience code of practice, hosted by Business in the Community (BITC) at the House of Commons on 10 February. This code is the result of years of work that began as an industry-led Property Flood Resilient Round Table set up by the Department for Environment, Food & Rural Affairs, following the publication of the Property Flood Resilience Action Plan in 2016.
With Storm Ciara hitting the UK on the same day, the need for an industry-wide set of guidance and standards is more crucial than ever. At present there is a lack of regulation and accepted standards around the specification and deployment of property flood prevention (PFR) limiting its potential positive impact. According to Aviva, there are approximately 5.2 million properties at risk of flooding in the UK. While insurance can provide financial protection, there also needs to be a focus on prevention.
The code is funded by Aviva, Environment Agency, Welsh Government, Department for Infrastructure and Scottish Government; and is supported by Chartered Institution of Water and Environmental Management (CIWEM), Institution of Civil Engineers (ICE) and Royal Institution of Chartered Surveyors (RICE). Further support and review was provided by a Project Steering Group made up of 55 Members from across industry, academia and the public sector.
While not all flood damage can be prevented, it can be limited. Flood resilience should have a tripartite approach: the government; insurance; and the customer. The code sets out six standards, each with an aim and number of requirements that need to be met:
- Hazard assessment
- Property survey
- Options development
- Commissioning and handover
- Operation and maintenance
Some of the recommended precautionary measures include:
- Install devices to prevent water from entering the property
- Flood gates on doors and windows
- Fit non-return valves on toilets or other waste systems
- Install self-closing air bricks
There are also recommended precautions to help minimise damage caused, including:
- Replace carpets with tile or concrete floors
- Move plug sockets above flood level
- Install free-standing kitchen units on legs
- Keep important items upstairs
- Replace concrete or tarmac outside with permeable materials
With an increase of similar storms likely due to the increasing threat of climate change, it is hoped that this code will help individuals and businesses understand the practical measures they can implement. This should then help to restore them back quicker.
In addition to the code, two complementary guidance documents have been developed, one aimed at planners and the other aimed at homeowners and businesses.
You can view Aviva’s summary of the code here:
You can download the first draft of the Code of Practice and guidance for property flood resilience - RP1055 HERE
Full guidance is expected to be published later in 2020.
This document is believed to be accurate but is not intended as a basis of knowledge upon which advice can be given. Neither the author (personal or corporate), the CII group, local institute or Society, or any of the officers or employees of those organisations accept any responsibility for any loss occasioned to any person acting or refraining from action as a result of the data or opinions included in this material. Opinions expressed are those of the author or authors and not necessarily those of the CII group, local institutes, or Societies.